Home > Drive Not > Disk Drive Not Working Windows 8

Disk Drive Not Working Windows 8


The drive name should be removed from the list (and the DVD/CD-ROM drives category will also be removed if there is only one drive). but i can just see 1 drive.... Ankur Thanks a lot.. If listed with a yellow exclamation mark or red X, remove the CD-ROM by highlighting the drive and pressing the delete key. Check This Out

DVD device still hidden... haasd 2nd method worked perfectly! Now you'll be able to see your CD/DVD drive in My Computer window. Miki Dennis saysJune 4, 2014 at 1:03 am Huge thanks.

Dvd Drive Not Showing In Windows 8

Third Method: Press and hold the buttons “Windows” and “R”. Thanks! jamil saysSeptember 11, 2015 at 6:24 pm 2nd method worked! Method 1 worked perfectly.

  1. I downloaded the small file and ran it and it worked a dream.
  2. method 1 worked perfectly.
  3. So I uninstalled the driver.
  4. If the troubleshooter detects problems, follow the instructions to fix the problem.
  5. So follow simple steps to fix CD/DVD drive not working in Windows.
  6. And NO, there are no issues with my hardware.

I cannot get the drive to stay connected to either USB 2.0 or 3.0 ports. Ritwik i have 2 drives, i applied the 2 method and it worked........ Figure : Replacing the side panel Check if the drive name appears in BIOS using the following steps: Turn on the computer and immediately press the F10 key repeatedly until the Cd Drive Not Detected Windows 7 I played a cd and it works fine.

My Samsung Spinpoint hd103sj (1TB sata hdd) is now visible in Windows 10. Try more software CDs to get an idea for how the drive is functioning. Find Solutions, ask questions, and share advice with other HP product owners. nigel After updating to Windows 10 my dvd no longer worked......

Method 1 brought back my liteon 1has124 DVD drive Shara saysDecember 23, 2015 at 1:19 am I tried method 1. Cd Drive Not Working Windows 7 Double-click IDE ATA/ATAPI controllers in Device Manager to see if there are any problems and troubleshoot them according to the error codes. If the CD/DVD drive is not original equipment and was recently added, make sure that the drive cables are installed correctly. My drive wasn't recognized because it was being blocked by a security program called Portshutter (that comes with FUJITSU machines).

Dvd Driver For Windows 8 Free Download

Bo saysNovember 4, 2012 at 3:46 pm "O now have my dvd" that is..sorry for the typo was just excited that it worked 🙂 MIKE saysNovember 1, 2012 at 4:36 pm You saved me a headache trying to fix this. Dvd Drive Not Showing In Windows 8 It is the one I installed Windows from and BIOS ALWAYS loads it. Windows 8 Cd Drive Not Reading Note: If the disc drive is not opening when you press the eject button, check the power cable on the CD-ROM drive to make sure it is connected securely and properly.

Really want her to use these methods, but she thinks that Toshiba will help with the problem. his comment is here It is Windows 10, 32 bit edition. Create a new key Controller0 under atapi key. 3. The FUJISTSU Portshutter program was causing the problem. Dvd Drive Not Detected In Windows 10

PLease help. warning: The edges of metal panels can cut skin. Clevelyn Crichlow saysJanuary 22, 2013 at 4:27 am Have tried your method without success. this contact form Be careful not to slide skin along any interior metal edge of the computer.

Then I just type my problem in google. Dvd Drive Not Recognized Windows 10 And the 1st method DOES work. Note: If the CD-ROM drive is not found in the Device Manager, it is likely the drive's cables are not connected properly or that the drive is bad and needs to

Good luck!

KenVahn 111.302 visualizaciones 5:01 how to fix the problem of cd rom in windows 8 ? - Duración: 2:35. it's awesome umgmgsein Thank you very much since I have fixed my PC by using your METHOD 1. if yes please write me windows 10 Enterprise x64 Final ASUS x42De. How To Open Cd Drive On Windows 8 Method one didn't help but Method two did the trick!

Turn on the computer and wait for Windows to start. Click Next. Thank you so much RAMEEZ RAJA very gud,,2nd method worked,,u r genius cfar Thanks so much for you solutions. #1 worked for one day then would disappear again until I checked navigate here Going into registry made me sweat but option 3 worked brilliantly.

Click(right click) on the Start menu. Your post helped me a lot, seriously. God bless you. Many thanks; saved me $150.

Devoc My CD/DVD drivers seemed to have disappeared after I was forced onto Windows 10. Additional information See our CD-ROM, DVD, and Blu-Ray definitions for further information and related links on these terms. After trying the 4 above, plus others I found elsewhere. Note: If the CD-ROM drive is not found in the Device Manager, it is likely the drive's cables are not connected properly or that the drive is bad and needs to

Inicia sesión para que tengamos en cuenta tu opinión. Open Device Manager using devmgmt.msc command and enable "View -> Show hidden devices" option. Anuncio Reproducción automática Si la reproducción automática está habilitada, se reproducirá automáticamente un vídeo a continuación. Then click the Software - Multimedia, and Software - Solutions links and look for any available recording software updates (for example: CyberLink Power2Go update).

You may need to uninstall your disc recording software, restart the computer, reinstall the CD/DVD writing software, then restart the computer again if the software no longer recognizes the drive (see If you have added a new drive, use the disc burning software that came with the drive or use the native burning capabilities of Windows. I will try this solution today. If we eliminate the second we should know which of the two it is.To fix a bad filter driver, do the following:1) open regedit.exe by typing "regedit" without quotes into the

Thank you! It is a new build, fully tested, and there are no hardware or port issues. Saugata Thanks a ton bro.