Home > Port Forwarding > Dsl-2740b Port Forwarding Not Working

Dsl-2740b Port Forwarding Not Working

Contents

This cannot be overstated. mirouterwifi 21,298 views 1:22 Open nat on xbox for D-Link routers - Duration: 2:15. That's it, congratulations! Thank you again for you help. check over here

port still not open!#2 If it still is not working, follow the rest of my directions..#3 In the router go to Setup -> Local Network#4 What is the Starting and Ending We all want the best possible product and experience with Synology, that's why we are here.Cheers. Have even tried to have the dsl in bridge mode and airport do the router work--was not able to get online with that--missing something. Yes it can be real frustrating, and as henkg, and mycloud stated can be complicated to solve as there are so many different network scenarios out there.

The Access Control Service Port 80 Is In The External Port Range

Masterj-Tricks 61,174 views 20:11 How to Port Forward a D-Link Router - Duration: 1:17. The downside is the alternate port uses only http Or you could port-forward a non-standard external port to port 80 or 443 on the DiskStation in the router. Working...

Insignificance 221,352 views 1:17 Port Forwarding. Remember the first three groups of digits, mostly 192.168.0. Follow me on Twitter 4 weeks 1 day ago -- @Steaintrain Are you the Nick Steain from Hackett? Canyouseeme When I put that machine out from the DMZ, all works "well" again, but then I need to forward ports, which doesn't seem to work properly...Any ideas ?HW version: T1Firmware: in

Standard ports: - For DSM: 5000 and/or 5001 (5000 for http, 5001 for https)- For Filestation: 7000 and/or 7001 (7000 for http, 7001 for https)- For webserver (and Photostation): 80- For Please Reset The External Port Range It's far better to learn and configure your own router.Let me address your standard port list. Logged unmei Level 1 Member Posts: 1 Re: Dlink DSL-2640B port forwarding not working ! « Reply #6 on: January 24, 2011, 06:03:07 PM » I'm also having problems with this navigate to these guys Below the text that says The text below might uniquely identify you on the Internet, is the IP Address that I want to compare to in your router.It should be exactly

Loading... Can You See Me Cloud works..sometimes. Same for Filestation or FTP: If you do not need remote access, don't forward these ports. Because each was a vulnerable Microsoft port, 5000 and 5001 are usually scanned by vulnerability assessors.Let me agree with your mandate for a robust admin password.

  1. Uploaded on Sep 27, 2010 Category Science & Technology License Standard YouTube License Loading...
  2. DS412+/4.2-3202/4x2tb Hitachi (SHR/Raid5)DS1812+/4.2-3202/8x4tb Hitachi (SHR2/Raid6)APC: Smart-UPS 1500/AP9630 UPS Network Management Card/RS BR1500LCD/BR1000GNetgear: GS724T-300 - ProSafeĀ® 24-port Gigabit Smart SwitchReadynas Pro Pioneer RNDP600E 6x2tb Hitachi (XRaid2/Raid6)NV+/4x1tb WD (XRaid/Raid5)Win7 64bit:6 Core Intel i990x
  3. robbiedarza 5,230 views 4:01 Loading more suggestions...
  4. The parts include: ports on the DS that you want to forward on your router, those ports then need to be forwarded on the router itself.
  5. Remember that the specified Private IP Address must be within the useable range of the subnet occupied by the Router.
  6. Within your LAN, not one port needs to be forwarded.
  7. I added my IPCAM to my router port forwarding as 192.168.1.3 & all port to 80 where my router ip is 192.168.1.1& setup my ip cam to 192.168.1.3 port :80when i
  8. The DSL-2740U will accept remote requests for these services at your Global IP Address, using the specified TCP or UDP protocol and port number, and then redirect these requests to the
  9. To your NAS or to your PC, laptop?

Please Reset The External Port Range

Logged soundlord Level 1 Member Posts: 2 Re: Dlink DSL-2640B port forwarding not working ! « Reply #3 on: December 12, 2010, 11:13:41 PM » Still no answer ?I saw that http://setuprouter.com/router/dlink/dsl-2740b/port-forwarding.htm Consider activating an alternate port in the control panel above and directly port forwarding it from outside to the DiskStation. The Access Control Service Port 80 Is In The External Port Range Loading... D'link Port Forwarding Not Working Restore password × Upload manual upload from disk upload from url Thank you for your help!

apexcctv 652,433 views 9:54 Setting Up Port Forwarding - Duration: 16:30. check my blog Port forwarding seems to work sometimes in some ports, in some not. Or do I just need to worry about forwarding the ports on one of the routers (which one?) and would I have a problem if the DS is on a different But port forwarding failed! Portcheck

It turns out the firmware (2.34) for the DLink unit on the Australian website is not the most recent. David Norton 824,570 views 8:51 Configurando modem dlink dsl 2640b internet oi - Duration: 10:58. Online Community Forum Skip to content Quick links Unanswered posts Active topics Search Forums Facebook Twitter Youtube FAQ Login Register Search Login Register Search Advanced search Board index Using Your Synology this content Behind the Actiontec I have a Dlink DIR-655 to allow me gigabit speed on my LAN.

DS412+. 4x WD40EFRX, RAID5. Whatismyip Last edited by henkg on Sun Aug 12, 2012 8:54 am, edited 11 times in total. You have to test remote access from outside.

Try to be as specific as you can with your trouble / troubleshooting, and be courteous and patient and someone one here will try to help.

Mede8er MED600X3D. MusicVideosPro 24,554 views 9:19 Compilation of D-Link DSL-2740 setup videos - Duration: 6:48. I see videos of people editing options in "Virtual Servers" - a tab that doesn't seem to exist in my menu. Your cache administrator is webmaster.

CCTV Camera Pros 146,077 views 3:01 D-Link Dsl-2740B vers.E1: internet setup (manual) - Duration: 1:22. I tried both cases but it still won't work as expected, I always have the router's interface...Was easier without this f*^łłg ADSL, ... I must say that that the above information is concise. have a peek at these guys Enter the internal IP address of the specific computer you are forwarding these ports to.

Logged FurryNutz Poweruser   ▲▲ ▲ Posts: 39339 D-Link Global Forum Moderator Re: Dlink DSL-2640B port forwarding not working ! « Reply #13 on: May 10, 2013, 11:01:55 PM » Disable uPnP if Quote Postby myCloud » Sun May 27, 2012 1:58 pm Nice job. Yes, I really have to learn every step in step by step.Any other suggestions? Ok I give up!!

Again, please remember that we are all users here trying to help each other out.